Welcome to www.xcore.com.my

Water Quality/Dialysis	WaterSoft™ Water Hardness Test Strip Easy to use test strip Results instantly or in less than 15 seconds Detects less than 4 ppm or 0.2 grain/gal. Quantitation range: 0 4 8 17 30 50 100 200 300 ppm Measures calcium and magnesium as total hardness Measure total hardness from 300 down to less than 4 ppm, or from 18 down to less than 0.2 grain/gal. Dual sensitivity scales make the reading of color blocks easy	Peracid Test™ The Only Quantitative Peracitic Acid Test Strip Dip-and-read test strip Takes only 30 seconds Measures peracetic acid from 250 - 5000 ppm without dilution Quantitative test results Peracetic Acid Potency test strips. Measure % concentration of Renalin® , or ppm peracetic acid. It is a quantitative test strip, rather than a Positive/Negative qualitative indicator strip. Dip-and-read in less than 30 seconds. No dilution required. The strip is best used for confirmation of required sterilant potency, quality assurance of accurate solution preparation or precise dosing of peracetic acid during disinfection of RO water purification system.

	Water/Dialysate/pH Acetic Acid/Citric Acid Indicator Dip-and-read test strip pH range 2.0 - 9.0 Easy to read color blocks 2.0 3.0 4.0 6.4 6.8 7.6 8.0 8.5 9.0 ppm Measure water. acid, base, carbonate or dialysate pH. The color blocks provide accurate pH readings of 7.2 - 7.6 for final dialysate or 8.0 to 8.5 for bicarbonate concentrate.	RenalCheck PX™ Residual Peroxide Test Strip Residual peroxide test strip Stable at room temperature No refrigeration required Detection range: 0 - 100 ppm Color blocks 0 0.5 1.0 3.0 10.0 ppm Residual Peroxide test strips. Test for the absence of residual peroxide. Stable at room temperature. No refrigeration required.

	WaterCheck™ CP All Purpose Disinfectant Test Strip Easy to use strip test Residual and potency test in one Reacts with chlorine, peroxide, iodine, and other oxidants Detection range, 0 - 5000 ppm chlorine Easy to read color blocks 0 0.5 1.0 ppm chlorine, 1%, 10% bleach Chlorine/Peroxide/Bleach. All purpose test strips. This is the most versatile test strip. The strip is sensitive to varieties of disinfecting agents, such as, chlorine, bromine, peroxide, iodine or ozone. The strip measures total chlorine. It will react to chlorine concentrations from trace to over 1000 ppm. The strip color will turn from light blue to dark blue, to dark brown. It is a residual chlorine and potency test for bleach, both in one strip. Because of its high sensitivity for peroxide, the strip is also commonly used for detection of residual peroxide in rinse water from RO column after disinfected with peracetic acid.